Planet WGSW-20160HP Managed Switch
16-Port 10/100/1000Mbps 802.3at PoE + 4-Port Gigabit TP / SFP Combo
Med PD Alive Check som sørger for å "Reboote" PoE enheter som ikke svarer på ping.
Det kan også sette opp scedule for å "Reboote" enheter til faste tider.
Physical Port•
16-Port 10/100/1000Base-T RJ-45 copper with IEEE 802.3at / 802.3af Power over Ethernet Injector function
•4 10/100/1000Mbps TP and SFP shared combo interfaces, SFP(Mini-GBIC) supports 100/1000Mbps Dual mode, shared with Port-17 to Port-20
•RS-232 DB9 console interface for basic management and setup
Power over Ethernet•Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
•Complies with IEEE 802.3af Power over Ethernet End-Span PSE
•Up to 16 ports of IEEE 802.3af / 802.3at devices powered
•Supports PoE Power up to 30.8 Watts for each PoE ports
•Auto detect powered device (PD)
•Circuit protection prevents power interference between ports
•Remote power feeding up to 100m
•PoE Management
– Total PoE power budget control– Per port PoE function enable/disable– PoE Port Power feeding priority– Per PoE port power limit– PD classification detection– PD Alive-check– PoE schedule
Layer 2 Features•Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control (Full-Duplex)
•High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwiDTh
•Storm Control support– Broadcast / Multicast / Unknown-Unicast
•Supports VLAN– IEEE 802.1Q Tagged VLAN– Up to 255 VLANs groups, out of 4094 VLAN IDs– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) – Private VLAN Edge (PVE)– Protocol-Based VLAN– MAC-Based VLAN– Voice VLAN
•Supports Spanning Tree Protocol– STP, IEEE 802.1D Spanning Tree Protocol– RSTP, IEEE 802.1w Rapid Spanning Tree Protocol– MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN– BPDU Guard
•Supports Link Aggregation– 802.3ad Link Aggregation Control Protocol (LACP)– Cisco ether-channel (Static Trunk)– Maximum 10 trunk groups, up to 16 ports per trunk group – Up to 32Gbps bandwiDTh (Full Duplex Mode)
•Provides Port Mirror (many-to-1)
•Port Mirroring to monitor the incoming or outgoing traffic on a particular port
•Loop protection to avoid broadcast loops
Quality of Service•Ingress Shaper and Egress Rate Limit per port bandwiDTh control
•8 priority queues on all switch ports
•Traffic classification– IEEE 802.1p CoS– TOS / DSCP / IP Precedence of IPv4/IPv6 packets– IP TCP/UDP port number– Typical network application
•Strict priority and Weighted Round Robin (WRR) CoS policies
•Supports QoS and In/Out bandwiDTh control on each port
•Traffic-policing policies on the switch port
•DSCP remarking
Multicast•Supports IGMP Snooping v1, v2 and v3
•Supports MLD Snooping v1 and v2
•Querier mode support
•IGMP Snooping port filtering
•MLD Snooping port filtering
•Multicast VLAN Registration (MVR) support
Security•IEEE 802.1x Port-Based / MAC-Based network access authentication
•Built-in RADIUS client to co-operate with the RADIUS servers
•TACACS+ login users access authentication
•RADIUS / TACACS+ users access authentication
•IP-Based Access Control List (ACL)
•MAC-Based Access Control List
•Source MAC / IP aDTress binding
•DHCP Snooping to filter untrusted DHCP messages
•Dynamic ARP Inspection discards ARP packets with invalid MAC aDTress to IP aDTress binding
•IP Source Guard prevents IP spoofing attacks
•Auto DoS rule to defend DoS attack
•IP aDTress access management to prevent unauthorized intruder
Management•Switch Management Interfaces– Console / Telnet Command Line Interface – Web switch management– SNMP v1, v2c, and v3 switch management– SSH / SSL secure access
•Four RMON groups (history, statistics, alarms, and events)
•IPv6 IP ADTress / NTP / DNS management
•Built-in Trivial File Transfer Protocol (TFTP) client
•BOOTP and DHCP for IP aDTress assignment
•Firmware upload/download via HTTP / TFTP
•DHCP Relay
•DHCP Option82
•User Privilege levels control
•NTP (Network Time Protocol)
•Link Layer Discovery Protocol (LLDP) Protocol
•Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
•Reset button for system reboot or reset to factory default
•PLANET Smart Discovery Utility for deploy management
•ICMPv6